Multiphase systems

From Thermal-FluidsPedia

(Difference between revisions)
Jump to: navigation, search
Line 3: Line 3:
*<B>[[Basics of Multiphase Systems|Basics]] </B>
*<B>[[Basics of Multiphase Systems|Basics]] </B>
*<B>[[Governing Equations for Transport Phenomena|Governing Equations]]</B>
*<B>[[Governing Equations for Transport Phenomena|Governing Equations]]</B>
-
:[[Basics of Governing Equations|Basics]], [[Integral Formulation of Governing Equations|integral formulation]], [[Differential Formulation of Governing Equations|differential formulation]], [[Jump Conditions at Interface|jump conditions]], and [[Averaging Formulation of Governing Equations|averaging formulation]].  
+
:[[Basics of Governing Equations|Basics]], [[Integral Formulation of Governing Equations|integral formulation]], [[Differential Formulation of Governing Equations|differential formulation]], [[Claisfications of PDE and Boundary Conditions|claisfications of PDE and boundary conditions]], [[Boundary Conditions at Interfaces|boundary conditions at interfaces]], and [[Averaging Formulation of Governing Equations|averaging formulation]].
*<b>[[Interfacial Phenomena]]</b>
*<b>[[Interfacial Phenomena]]</b>
:[[Surface tension]], [[contact angle]], [[wettability]], [[disjoinig pressure]], [[interfacial thermal resistance]], and [[Instability of Thin Liquid Film|instability]].
:[[Surface tension]], [[contact angle]], [[wettability]], [[disjoinig pressure]], [[interfacial thermal resistance]], and [[Instability of Thin Liquid Film|instability]].

Revision as of 15:54, 18 April 2009

A multiphase system is one characterized by the simultaneous presence of several phases, the two-phase system being the simplest case. The analysis of multiphase systems can include consideration of multiphase flow and multiphase heat and mass transfer. Based on the phases that are involved in the system, phase change problems can be classified as: (1) solid-liquid phase change (melting and solidification), (2) solid-vapor phase change (sublimation and deposition), and (3) liquid-vapor phase change (boiling/evaporation and condensation).

Basics, integral formulation, differential formulation, claisfications of PDE and boundary conditions, boundary conditions at interfaces, and averaging formulation.
Surface tension, contact angle, wettability, disjoinig pressure, interfacial thermal resistance, and instability.
Classification, boundary conditions at interface, exact solution,and numerical solution, effect of natural cvonvection.
Basics, dropwise condensation, vertical plate, cylinder and sphere, nongravitational condensate removal, and film condensation in porous media.
Bascis, horizontal plate, falling film, direct contact, pores and microchannels, and porous media.
Pool boiling regimes, nucleate boiling, critical heat flux (CHF), transition boiling, minimum heat flux, film boiling, and boiling in porous media.
Flow Patterns, flow models, forced convective condensation, forced convective boiling, and micro- and minichannels.