Multiphase systems

From Thermal-FluidsPedia

Revision as of 21:00, 20 April 2009 by Founding Editor (Talk | contribs)
Jump to: navigation, search

A multiphase system is one characterized by the simultaneous presence of several phases, the two-phase system being the simplest case. The analysis of multiphase systems can include consideration of multiphase flow and multiphase heat and mass transfer. Based on the phases that are involved in the system, phase change problems can be classified as: (1) solid-liquid phase change (melting and solidification), (2) solid-vapor phase change (sublimation and deposition), and (3) liquid-vapor phase change (boiling/evaporation and condensation).

Overview and classifications.
Basics, integral formulation, differential formulation, claisfications of PDE and boundary conditions, boundary conditions at interfaces, and averaging formulation.
Surface tension, contact angle and wettability, phase equilibrium in microscale interfacial systems, instability, and numerical simulation of interfaces and free surfaces.
Classifications, boundary conditions at interface,exact solutions, integral approximate solution, numerical solution, binary system, and melting and solidification in porous media.
Sublimation and Chemical Vapor Deposition (CVD).
Basics, dropwise condensation, filmwise condensation, nongravitational condensate removal, film condensation in porous media, and forced convective condensation.
Bascis, film evaporation, direct contact evaporation, microchannels and porous media.
Classification, pool boiling, boiling in porous media, and forced convective boiling.
Flow Patterns, flow models, forced convective condensation, forced convective boiling, and micro- and minichannels.
Basics, governing equations, multiphase transport, melting and solidification, condensation, eavporation, and boiling.