Nonconventional Heat Pipes

From Thermal-FluidsPedia

(Difference between revisions)
Jump to: navigation, search
Amir Faghri (Talk | contribs)
(Created page with '{{HeatpipeTypes_Category}} [[Image:HPfig19.png|center|thumb|400px|alt=Conceptual design of a leading edge heat pipe.|<center>'''Figure 1: Conceptual design of a leading edge heat…')
Newer edit →

Revision as of 20:04, 12 March 2014

 Related Topics Catalog
Types of Heat Pipes
  1. Two-Phase Closed Thermosyphon
  1. Capillary-Driven Heat Pipe
  1. Annular Heat Pipe
  1. Vapor Chamber
  1. Rotating Heat Pipe
  1. Gas-Loaded Heat Pipe
  1. Loop Heat Pipe
  1. Capillary Pumped Loop Heat Pipe
  1. Pulsating Heat Pipe
  1. Monogroove Heat Pipe
  1. Micro and Miniature Heat Pipes
  1. Inverted Meniscus Heat Pipe
  1. Nonconventional Heat Pipes
Conceptual design of a leading edge heat pipe.
Figure 1: Conceptual design of a leading edge heat pipe.


While the majority of heat pipes have a cylindrical or rectangular cross section, specific applications require the use of heat pipes with other geometries. Examples include heat pipe cross sections with polygonal shapes, such as micro/miniature heat pipes, or cross sections that vary along the length of the heat pipe. An example of this latter type of cross section is shown in Fig. 1, where nosecap and leading edge heat pipes are shown schematically. Another example that standard coordinate systems, such as Cartesian or cylindrical coordinates, are not applicable is heat pipe turbine vane cooling [1] as shown in Fig. 2.

A sketch of the heat pipe turbine vane: (a) heat pipe turbine vane cooling; (b) representative vane cross section.
Figure 2: A sketch of the heat pipe turbine vane: (a) heat pipe turbine vane cooling; (b) representative vane cross section.

The leading edge heat pipe has been proposed to cool the leading edges of future hypersonic aircraft and reentry vehicles (Fig. 1) [2]. The heat pipe will cover the leading edges of the wings and engine nacelles, where the aerodynamic heating is the most intense. The heat will be absorbed and transported through the heat pipe to the condenser, where it will be rejected by radiation and/or convection. The extremely high heat fluxes and temperatures which will be experienced by the proposed leading edge heat pipe will make its design and manufacturing one of the most challenging design problems faced by heat pipe engineers to date.

References

  1. Zuo, Z. J., Faghri, A., and Langston, L., 1998, "Numerical Analysis of Heat Pipe Turbine Vane Cooling," Journal of Engineering for Gas Turbines and Power, 120(4), 735-743. http://dx.doi.org/10.1115/1.2818461
  2. Cao, Y., and Faghri, A., 1991, "Transient Multidimensional Analysis of Nonconventional Heat Pipes with Uniform and Nonuniform Heat Distributions," Journal of Heat Transfer, 113(4), 995-1002. http://dx.doi.org/10.1115/1.2911233