Thermodynamics Cycle

From Thermal-FluidsPedia

(Difference between revisions)
Jump to: navigation, search
(References)
 
(One intermediate revision not shown)
Line 14: Line 14:
* http://www.greencarcongress.com/2009/09/scuderi-iaa-20090908.html
* http://www.greencarcongress.com/2009/09/scuderi-iaa-20090908.html
*http://en.wikipedia.org/wiki/Thermodynamic_cycle - wikipedia.com
*http://en.wikipedia.org/wiki/Thermodynamic_cycle - wikipedia.com
-
*Cengel, Yunus. Boles, Michael. ''Thermodynamics: An Engineering Approach'', 7th edition. McGraw-Hill Science, 2006.
+
*Cengel, Yunus A.; Boles, Michael; (2010). Thermodynamics: An Engineering Approach, 7th edition. McGraw-Hill Science.
==Further Reading==
==Further Reading==
==External Links==
==External Links==
 +
 +
 +
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see [http://en.wikipedia.org/wiki/Wikipedia:General_disclaimer full disclaimer]).

Current revision as of 23:00, 8 July 2011

A thermodynamic cycle is a series of thermodynamic processes transferring heat and work, while varying pressure, temperature, and other state variables, eventually returning a system to its initial state. State Properties depend only on the thermodynamic state and cumulative variation of such properties add up to zero. Path Quantities, such as heat and work are process dependent, and cumulative heat and work are non-zero. The first law of thermodynamics dictates that the net heat input is equal to the net work output over any cycle. The repeating nature of the process path allows for continuous operation, making the cycle an important concept in thermodynamics. Thermodynamic cycles often use quasistatic processes to model the workings of actual devices.

Contents

Overview

Two primary classes of thermodynamic cycles are power cycles and heat pump cycles. Power cycles are cycles which convert some heat input into a mechanical work output, while heat pump cycles transfer heat from low to high temperatures using mechanical work input. Cycles composed entirely of quasistatic processes can operate as power or heat pump cycles by controlling the process direction.

Thermodynamic power cycles are the basis for the operation of heat engines, which supply most of the world's electric power and run almost all motor vehicles. Power cycles can be divided according to the type of heat engine they seek to model. The most common cycles that model internal combustion engines are the Otto cycle, which models gasoline engines and the Diesel cycle, which models diesel engines. Cycles that model external combustion engines include the Brayton cycle, which models gas turbines, and the Rankine cycle, which models steam turbines.

Thermodynamic heat pump and refrigeration cycles are the models for heat pumps and refrigerators. The difference between the two is that heat pumps are intended to keep a place warm while refrigerators are designed to cool it. The most common refrigeration cycle is the vapor compression cycle, which models systems using refrigerants that change phase. The absorption refrigeration cycle is an alternative that absorbs the refrigerant in a liquid solution rather than evaporating it. Gas refrigeration cycles include the reversed Brayton cycle and the Hampson-Linde cycle. Regeneration in gas refrigeration allows for the liquefaction of gases.

References

Further Reading

External Links

This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer).