Table of Content

Open Access iconOpen Access

ARTICLE

STUDY ON THERMAL AND HYDRAULIC PERFORMANCE OF THE FINNED FLAT-TUBE HEAT EXCHANGER WITH SINGLE ROW AND ITS OPTIMIZATION

Weiwei Zhang, Linghong Tang*

School of Mechanical Engineering, Xi’an Shiyou University, Xi’an 710065, Shaanxi, China

* Corresponding Author: E-mail: email

Frontiers in Heat and Mass Transfer 2020, 15, 1-7. https://doi.org/10.5098/hmt.15.9

Abstract

Air-side thermal and hydraulic performance of the finned flat-tube heat exchanger with single row is experimentally investigated. The correlations of the thermal and hydraulic performance are developed based on the experimental data. The effects of various fin geometrical parameters on the thermal and hydraulic performance are investigated by a numerical method, and the influence of various parameters is analyzed in detail. Results show that heat transfer performance and pressure drop decrease with the increasing fin pitch, and heat transfer performance increases with the increase of fin length and fin height accompanying with the increase of pressure drop. The design parameters of fin are optimized by the Taguchi method. Twenty-five kinds of models are made by compounding levels on each factor, and the thermal and hydraulic performance of each model is analyzed. The optimal condition is acquired by analytical results.

Keywords


Cite This Article

Zhang, W., Tang, L. (2020). STUDY ON THERMAL AND HYDRAULIC PERFORMANCE OF THE FINNED FLAT-TUBE HEAT EXCHANGER WITH SINGLE ROW AND ITS OPTIMIZATION. Frontiers in Heat and Mass Transfer, 15(1), 1–7.



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 183

    View

  • 171

    Download

  • 0

    Like

Share Link