Table of Content

Open Access iconOpen Access

ARTICLE

STUDY ON THE LIFETIME OF CATALYST IN CATALYTIC COMBUSTION FURNACE OF NATURAL GAS AND APPLICATIONS OF HEATING POTTERY

Shihong Zhang* , Hui Yang

School of Environment and Energy Engineering, Beijing University of Civil Engineering and Arch., Beijing, 100044, China

* Corresponding Author: Email: email .

Frontiers in Heat and Mass Transfer 2019, 12, 1-5. https://doi.org/10.5098/hmt.12.6

Abstract

This article discussed the lifetime of catalyst on cost effect for catalytic combustion furnace and applications of pottery heated by catalytic combustion furnace in purification water. The time of start-up process rises with the increase of the number of ignition. The catalyst sintering was remarkable. By reducing the number of ignition and adjusting the temperature rise uniformly in the furnace, the efficient utilization of thermal energy could be realized to saving production cost and extending the lifetime of catalyst. With exquisite and even-textured surface the pottery had striking purification effect on water. The water purification material of this pottery was applied to the sedimentation tank, which had remarkable water purification efficiency and could save the operating cost of the water treatment system.

Keywords


Cite This Article

Zhang, S. (2019). STUDY ON THE LIFETIME OF CATALYST IN CATALYTIC COMBUSTION FURNACE OF NATURAL GAS AND APPLICATIONS OF HEATING POTTERY. Frontiers in Heat and Mass Transfer, 12(1), 1–5.



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 243

    View

  • 163

    Download

  • 0

    Like

Share Link